9
System Requirements
macOS 10.11.6 (El Capitan) or later
Mac: Intel or Apple Silicon CPU,
1GB RAM Minimum
1. Connect iD4
Using the USB - C cable provided, connect
iD4 to a USB - C port on your Mac.
2. Check Connectivity
Once connected to your computer and
powered on, the white USB LED on iD4 will
illuminate.
If at any time the USB LED turns o during
normal operation please check all connections
and if further problems develop please contact
Audient support.
3. Set iD4 as Audio Device
Select iD4 in the audio device list found in:
System Preferences > Sound > Output
You will need to check that iD4 is selected as
the audio device in your chosen Digital Audio
Workstation Software (DAW) as well. This
setting is normally found in an Audio Settings
or Preferences menu. See pages 18 - 22 for
information on setting up iD4 with some
common DAWs.
Mac Installation
USB - C
To Next Page
Loading...
