12
iOS Installation
iOS System Requirements:
iD4 can be used on iOS or iPadOS devices that
have lightning ports or USB-C ports providing
the device is using iOS 6 or later.
No drivers are required for iOS or iPadOS
operation.
Devices with a Lightning Port
To Connect the iD4 to an iOS device with a
lightning port, an Apple Camera Connection
Kit and Active USB hub must be used.
Plug the USB hub into the USB port on the
Camera Adapter kit, and connect the kit to
your iOS device (to charge the iOS device, you
can plug a charging cable into a port on the
USB hub and camera kit as well).
Now Connect the iD4 to one of the USB ports
on the Active USB hub.
Device with USB-C Port
The iD4 can simply be connected directly
and the iOS device with a USB-C port using a
USB-C to USB C cable.
The USB-C port will provide the correct
voltage for the iD4 to function fully.
1. Connect iD4 to hub
Using the USB cable provided, connect
iD4 to a USB port on the powered USB hub.
2. Connect to iOS Device
Plug the USB hub into the USB port on the
Camera Adapter kit, and connect the kit to
your iOS device (to charge the iOS device, you
can plug a charging cable into a port on the
USB hub and camera kit as well).
3. Check Connectivity
Once connected to your iOS device, and
powered on, the white USB LED on iD4 will
illuminate.
To Next Page
Loading...
Need help?
General
