34
Mono
The mono button sums the stereo outputs
down to mono. This can be used to quickly
check the mono compatibility of your mix to
make sure it’ll sound great almost anywhere!
ALT
ALT allows you to quickly switch your monitor
path to a secondary set of monitors to
let you check how your mix translates on
various speakers.
You can select which outputs the ALT monitor
control flips to in the System Panel.
Dim
Reduces the output level by a pre-set
amount, which can be great if you get a call
or need to quickly chat to someone during a
session.
Cut
The cut button cuts the signal to the
monitors.
All these controls can be controlled from the
iD44 itself, either by assigning them to an
F-Key, or using the dedicated Talkback, Dim
and Cut controls.
Assigning F-Keys
Various functions of the iD mixer application
can be assigned to the Function Keys of the
iD44 to allow you to quickly control your
monitoring at the click of a button.
To assign a monitor control to an F-Key, simply
right click on the control and select the F-Key.
To Next Page
Loading...
