Dante PCIe-R Card
CONFIDENTIAL. Copyright © 2014 Audinate Pty Ltd. All Rights Reserved.
-8-
Getting Started
This User Guide has been designed to provide you with the information you will need to install and operate
your Dante PCIe-R.
To start using your Dante PCIe-R, follow the steps below.
1.
Install your Dante PCIe-R and driver software
Refer to the section About Your PCIe Card for details about your card specification and installation
instructions.
2.
Download and install your Audinate software
From the Audinate website – www.audinate.com.
3.
Set up your Dante network
Refer to the section Connecting to a network for details.
4.
Configure your audio software to use the Dante PCIe-R
Refer to the sections Basic Operation and Configuring your card for details.
To Next Page
Loading...