When connecting with the RCA audio cable, refer to “Connecting the device” on p. 7.
Volume adjustment cannot be performed if there is no volume adjustment on the connected speakers, etc.
Connecting via Bluetooth wireless technology
The product supports Bluetooth wireless connection. It can be connected with Bluetooth-compatible headphones,
active speakers and wireless stereo speakers (hereinafter referred to as Bluetooth receiver devices).
About pairing
When connecting a new Bluetooth receiver device, you need to pair it with the product. Once the Bluetooth receiver
device and the product are paired, you do not need to pair them again. However, in the following cases you will need
to pair again even if the Bluetooth receiver device was paired once:
If the product is deleted from the Bluetooth receiver device’s connection history.
If the product is sent out for repair.
If 9 or more devices are paired. (The product can save the pairing information of up to 8 devices. When you pair
with a new device after pairing with 8 devices, pairing information for the device with the oldest connection date
will be overwritten by the information for the new device.)
Pairing a Bluetooth device
Read the user manual for the Bluetooth receiver device.
Place the device within 1 m (3.3′) of the product to perform pairing correctly.
1. Set your Bluetooth headphones, speakers, etc. to pairing mode.
2. Make sure the AC adapter is connected to an outlet, and then press and hold the wireless function
button (about 2 seconds).
The indicator LED will flash in red and blue alternately.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
