AudioCodes Mediant 800B - Figure 5-22: Plugging AC Power Cord into AC;DC Adaptor

Gateway & E-SBC 51 Mediant 800
Hardware Installation Manual 5. Cabling the Device
2. Plug the female connector that is located on one end of the AC power cord (supplied),
into the AC/DC power adaptor.
Figure 5-22: Plugging AC Power Cord into AC/DC Adaptor
3. Plug the other end of the AC power cord (supplied) into a standard electrical wall outlet.
The device's DC PWR LED, located on the front panel, lights up green.