AUMA SQ Series User Manual

Read operation instructions first.
●
Observe safety instructions.
●
These operation instructions are part of the product.
●
Retain operation instructions during product life.
●
Pass on instructions to any subsequent user or owner of the product.
Purpose of the document:
This document contains information for installation, commissioning, operation and maintenance staff. It is intended
to support device installation and commissioning.
Reference documents:
●
Manual (Operation and setting ) of actuator controls AC 01.2 Modbus
●
Manual (Fieldbus device integration) of actuator controls AC 01.2 Modbus
Reference documents can be downloaded from the Internet (www.auma.com) or ordered directly from AUMA
(refer to <Addresses>).
Table of contents Page
51. Safety instructions.................................................................................................................
51.1. Basic information on safety
51.2. Range of application
61.3. Applications in Ex zone 22 (option)
61.4. Warnings and notes
71.5. References and symbols
82. Identification...........................................................................................................................
82.1. Name plate
112.2. Short description
123. Transport, storage and packaging........................................................................................
123.1. Transport
133.2. Storage
143.3. Packaging
154. Assembly................................................................................................................................
154.1. Mounting position
154.2. Handwheel fitting
154.3. Part-turn actuator to valve: mount
164.3.1. Output drive for coupling
164.3.1.1. Part-turn actuator (with coupling): mount to valve
194.4. Mounting positions of local controls
194.4.1. Mounting positions: modify
205. Electrical connection.............................................................................................................
205.1. Basic information
235.2. SD electrical connection (AUMA plug/socket connector)
245.2.1. Terminal compartment (for mains connection): open
255.2.2. Cable connection
265.2.3. Terminal compartment (for mains connection): close
275.2.4. Fieldbus terminal compartment: open
285.2.5. Fieldbus cables: connect
295.2.6. Fieldbus terminal compartment: close
2
SQ 05.2 – SQ 14.2 / SQR 05.2 – SQR 14.2 Control unit - electromechanical
Table of contents AC 01.2 Intrusive Modbus RTU

AUMA SQ Series Specifications

General

Brand	AUMA
Model	SQ Series
Category	Controller
Language	English