To Next Page

To Previous Page

589.8.2. Limit switching: check

589.8.3. Reference operation position feedback: perform

589.9. Mechanical position indicator: set

599.10. Switch compartment: close

6010. Commissioning (optional equipment settings)...................................................................

6010.1. EWG 01.1 electronic position transmitter

6110.1.1. Measuring range: set

6110.1.2. Current values : adjust

6210.1.3. LED end position signalling: switch on/off

6210.2. Potentiometer

6210.2.1. Potentiometer: set

6310.3. RWG electronic position transmitter

6310.3.1. Measuring range: set

6511. Corrective action....................................................................................................................

6511.1. Faults during commissioning

6511.2. Fault indications and warning indications

7011.3. Fuses

7011.3.1. Fuses within the actuator controls

7011.3.2. Fuse replacement

7011.3.2.1. Replace fuses F1/F2.

7111.3.2.2. Test/replace fuses F3/F4

7111.3.3. Motor protection (thermal monitoring)

7312. Servicing and maintenance...................................................................................................

7312.1. Preventive measures for servicing and safe operation

7312.2. Maintenance

7312.3. Disposal and recycling

7513. Technical data.........................................................................................................................

7513.1. Technical data Part-turn actuator

7813.2. Technical data Actuator controls

8414. Spare parts.............................................................................................................................

8414.1. Part-turn actuators SQ 05.2 – SQ 14.2/SQR 05.2 – SQR 14.2

8614.2. AC 01.2 actuator controls with SD electrical connection

8815. Certificates..............................................................................................................................

8815.1. Declaration of Incorporation and EU Declaration of Conformity

91Index........................................................................................................................................

94Addresses...............................................................................................................................

SQ 05.2 – SQ 14.2 / SQR 05.2 – SQR 14.2 Control unit - electromechanical

Table of contents AC 01.2 Intrusive Modbus RTU

AUMA SQ Series User Manual

Other manuals for AUMA SQ Series