Page 18 of 51
• Drill two holes, diameter 5 mm and 3 cm apart from each other.
• Insert the dowels.
• Screw the base to the wall using the screws provided.
• The PVI-DESKTOP support base is designed to make it easy to remove the device even with the
power or communication cables inserted.
4.2.2 DESK INSTALLATION
The PVI-DESKTOP base enables comfortable and solid positioning on flat surfaces such as tables or desks.
The axis inclination of about 10° allows for easier reading of the display and more comfortable use of the
touch screen.
4.3 HOW TO USE – POWER-SUPPLIES
The PVI-DESKTOP has 3 different power-supplies:
- Universal power-supply AC/DC, 5 V, 1.5A
- USB cable for connection to USB 2.0 port of the PC
- Lithium internal battery, 1800mAh, 3.7V nominal
The unit is very versatile due to the combination of these 3 power-supplies.
AC/DC power-supply always connected
The PVI-DESKTOP can also be used with the power supply always connected causing no problem to its
internal battery. Nevertheless, it is recommended that a full charging and discharging cycle of the battery
be carried out twice a year.
This is an optimal modality of use and does not require any particolar setting.
Connecting via USB cable
The USB cable is another power source which can provide enough energy for unit operation. PC connecting
must be considered as “maintening energy” charge and might not allow a full charge depending on setting.
Lithium battery
The use the PVI-Desktop on battery mode is very much influenced by the system setting. A display warning
and a flashing red LED light indicate that the device needs recharging. To see how long the battery lasts
please see paragraph 5.2.
To Next Page
Loading...
Need help?
General