Page 27 of 51
The screen shows the graph of the power produced by the system (tab SYSTEM) and each individual
inverter (tab INV.1, INV.2, INV.3, etc.). The right side also summarises the sensitive parameters. The graph
with black background in the central black band of the display shows the data for the system or the
inverter selected from the tabs.
By touching or clicking on the tabs, the graphs and data for each individual inverter (INV.N) or the
complete system (SYS) can be selected, the tab also reports the status of each individual inverter or system
through coloured dots indicating:
• Green dot – Inverter running correctly
• Yellow dot – Inverter not connected to the network
• Red dot – Inverter in alarm
• Blue dot – Inverter off or no radio or cabled communication
In this section all the production data for the system for certain time intervals can be recalled. Sub-sections
indicate the time interval for the production data (Total, Partial, Today, 7 days, 30 days, 365 days, User).
5.7.2 SETTINGS MENU
In this section the device's configuration parameters cab be entered or changed:
• "Date-Time" allows changes of date and time set.
• "Money" allows entering the current exchange rate for calculating savings.
• "Display" sets the brightness and recalibrates the touch screen.
• "Language" allows system language setting.
• "Configuration Wizard" allows the communication channel to be re-configured
• "Firmware Update" enables upgrade of the PVI-DESKTOP firmware to the latest level, through an SD
card.
• "Sleep" heading, on the other hand, allows the battery save function to be activated. This function
can be enabled or disabled at set time intervals (see paragraph 5.7).
• Models with Bluetooth® also have a heading in this menu dedicated to the enabling/disabling of the
peripheral.
5.7.3 INFO MENU
In the sub-sections of this menu it is possible to get information as follows:
• Aurora PVI Desktop ID: device ID info
• System ID: info related to PVI-DESKTOP associated inverter and RADIOMODULE installed inside each
of them.
• Firmware: firmware version installed into the PVI-DESKTOP.
To Next Page
Loading...
Need help?
General