EasyManua.ls Logo

Autel MaxiCharger - Stopping Charge Session

Autel MaxiCharger
78 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
54
16 Pilot fault
Use an Autel diagnostics
tool to scan fault, and
contact the vehicle
manufacturer to clear fault.
17
No Proximity Pilot
(PP) connection or
PP fault
Examine the connection of
the EV charge cable.
Ensure both EV charge
cables are not broken or
frayed.
If the problem persists,
contact your local
representative.
18 E-lock failure
Examine the connection of
the EV charge cable.
If the problem persists,
contact your local
representative.
19
Bluetooth module
communication
failure
Make sure the Bluetooth is
enabled on your mobile
device and the charging
station is powered on and
operating properly.
Forget the charging station
in the Bluetooth settings on
your mobile device and pair
the charging station to your
device via Bluetooth again.
If the problem persists,
contact your local
representative.

Other manuals for Autel MaxiCharger

Related product manuals