EasyManua.ls Logo

Autel MaxiCharger - Page 59

Autel MaxiCharger
78 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
53
8
Inputs incorrectly
wired: possibly Line
and Neutral are
inverted
Correct the wiring.
9
Ground fault
Ensure the charging station is
earthed correctly.
10
Power failure
Ensure the switch to the
circuit breaker is on.
11
Over-heating
Check whether the EV charge
cable is securely connected.
Ensure the operating
temperature is within the
specified range on the
product label.
Stop charging. Restart
charging in half an hour.
12
Residual current
detected
Unplug the vehicle and plug
in again. If the problem
persists, contact your local
representative.
13
Abnormal pilot
voltage
Unplug the vehicle and plug
in again.
14 Contactor fault
Contact your local
representative.
15 Over current
Unplug the vehicle and plug
it again.

Other manuals for Autel MaxiCharger

Related product manuals