14
Figure 3-10
3) Press the Y button to save your selection or the N button to exit without
change.
Wheels
This function allows you to set sensor testing mode in All Wheels or One
Wheel.
1) From System Setting screen, use the UP/DOWN scroll button and
LEFT/RIGHT scroll button to select Wheels, and press the Y button.
2) From Wheels screen, use the LEFT/RIGHT scroll button to select All
Wheels or One Wheel mode for TPMS sensor testing.
Figure 3-11
3) Press the Y button to save your selection or the N button to exit without
change.
NOTE
In All Wheels mode, the tool will determine if a duplicate sensor ID has
been read. In this case, the tool will display a message “Sensor ID
To Next Page
Loading...
