23
Under One Wheel mode, the tool can save up to 10 TPMS sensor data
records at each time. Select the wheel icon and press Y button to view all
sensors’ information. Press the UP/DOWN and LEFT/RIGHT scroll button
to turn over data screens while viewing. If more than ten records are stored,
the latest record will overwrite the oldest record.
Table 4-1 Possible Results for Testing
TPMS sensor is successfully activated and
decoded. The tool displays the sensor
information.
If the search period expires and no sensor
is activated or decoded, it may be caused
by wrong sensor fitting or non-functioning
sensor. The tool then displays a message
“No sensor detected”.
In this case, repeat testing to confirm the
TPMS failure.
A TPMS sensor is activated and decoded,
but does not match the protocol for the
Make, Model or Year that the tool was
set-up for. The tool displays a message
“Sensor triggered but cannot be known”.
In this case, verify the Make, Model or Year
or other features you have selected as well
as the sensor part number that was fitted.
Duplicate ID
(only checked in
All Wheels
mode)
A sensor with a duplicate ID has been
read. The tool displays a message “Sensor
ID Duplicated.”.
In this case, clear data and re-read again.
NOTE
With Ford sensors, the tool should be held 180 degrees away from the stem.
Please refer to vehicle user’s manual.
To Next Page
Loading...
