22
Under All Wheels mode, the tool can save up to 5 TPMS sensor data
records at each time. Press the UP/DOWN or LEFT/RIGHT scroll button to
turn over data screens while viewing. If more than five records are stored,
the latest record will overwrite the oldest record.
One Wheel Mode
In this mode the screen will show as below (Figure 4-8). The tool will check
TPMS sensor on the single wheel. Place the tool alongside the valve stem,
point toward the sensor location, and press the TEST button. Wait for test
result before moving the tool.
The tool will send LF signal to trigger the sensor. Depending on the sensor
type, the tool will activate the sensor on the first or last step. Once the
sensor is successfully activated and decoded, the tool will display as below
with a beep (Figure 4-9).
Figure 4-8
Figure 4-9
Once the first sensor test is completed, the screen will remain for 3 seconds
for data viewing and then automatically switch to next sensor test. Follow
the same procedure for the other sensor tests.
To Next Page
Loading...
