The tool will do TPMS test in a sequence of FL (Front Left), FR (Front
Right), RR (Rear Right), LR (Rear Left) and SPARE, if the vehicle has the
option for the spare. Or, you can use the UP/DOWN or LEFT/RIGHT scroll
button to move to the desired wheel for testing.
Place the tool alongside the valve stem, point toward the sensor location,
and press the TEST button.
The tool will send LF signal to trigger the sensor. Once the sensor is
successfully activated and decoded, the tool will display as below with a
beep.
Figure 4-7
✓ Wheel with a feedback icon, “√”, “x”, “D”, indicates wheel test has been
finished. Refer to Table 4-1 Possible Results for Testing for detailed
description to learn what testing result each icon stands for.
✓ Press the Y button to read all sensor data, including sensor ID, tire
pressure, temperature, battery condition and modulation.
To Next Page
Loading...
