32
Read Codes
1) From the TPMS Diagnosis Menu, use the UP/DOWN scroll button to
select the Read Codes, and press the Y button.
2) The tool will display TPMS DTCs retrieved from the vehicle’s ECU for
your viewing. Select Save to store data for future review, or press N
button to exit without saving.
Figure 4-26
Erase Codes
1) From the TPMS Diagnosis Menu, use the UP/DOWN scroll button to
select the Erase Codes, and press the Y button.
2) The tool will display a warning message for your confirmation. Select
Yes to continue, or select No to exit.
Figure 4-27
3) If the erase command is sent successfully, the screen will show as
below. Press any button to continue. To make sure codes are erased
clearly, run Read Codes again.
To Next Page
Loading...
