56
Figure 5-34
NOTE
In One Wheel mode, the tool can save at most 10 triggered sensors’
information each time. Please do not use the MX-Sensors with the same ID
in the same vehicle.
In All Wheels mode, if you had successfully performed both the Read IDs
from Vehicle function and the activation function, the screen may show as
below. You can choose either Copy by Activation or Copy by OBD even the
IDs are not matched.
Figure 5-35
Once programmed with Copy by Activation and Copy by OBD, the
MX-Sensor can be installed in the wheel directly to be mounted on the car
and the TPMS warning light will turn off without needing to write IDs to the
vehicle.
To Next Page
Loading...
