78
password.
3. If you are a new member to Autel, click on the Create Autel ID button
on the left side of the screen to create an ID.
4. Enter the required information in the input fields, and click the Get
Verification Code button to get a verification code for email validation.
5. The online system will automatically send a verification code to the
registered email address. Input the code in the Verification Code field
and complete other required fields. Read through Autel’s Terms and
Conditions and click on Agree, and then click Create Autel ID at the
bottom. A product registration screen will display
6. The device’s Serial Number and Register Password is located in the
About section of the Settings menu on the tool.
7. Select your product model, enter the product serial number and
password on the Product Registration screen, and click Submit to
complete the registration procedure.
Update Procedure
Autel frequently releases software updates.
Please update the TMPS tool via SD card. Remove the SD card from the
tool and connect it with computer, and follow the update procedure to finish
updating.
1) Run the Maxi PC Suite. Wait for the Log In window to pop up.
Figure 9-2
2) Enter your Autel ID and password and wait for the Update window to
display. If you forget your password, click the [Forget Password?] to
link to our website and retrieve your password.
To Next Page
Loading...
