79
3) In the Update window, select the items you want to install. Usually, you
should install all available updates.
Figure 9-3
Generally there are two ways to update programs:
Batch Update
1) Select the programs that you would update by clicking on the check
boxes next to those items. Then click the Update Selected Items
button on the right side of screen. Or
2) Click on the Select All checkbox on the right side of screen and all
updatable items will be selected automatically. Then click the Update
Selected Items button on the right side of screen.
3) Check the updating process by observing the upper left progress bar
[Downloads] and upper right progress bar [Installs]. You may also find
progress information in the Status column of updated items.
4) When the downloading is completed, the downloaded programs will be
installed automatically. The new version will replace the old version.
5) Anytime you could click the Pause button on the right side of screen to
suspend all progresses.
6) To resume updating process, you may need to select those suspended
items again, and then click the Update Selected Items button. The
progress will resume from the break point.
Single Update
1) Find out the desired updating item and click the Install button in the
same line, and the Install button changes to Pause at the same time.
To Next Page
Loading...
