AUTIC APPC-8429T - Monitor Adjustment, Models with High Brightness

To Next Page

To Previous Page

Autic System Marine PC Rev. 1.1 Page 18

MONITOR ADJUSTMENT, MODELS WITH HIGH BRIGHTNESS

Membrane keypad for Panel PC with High Brightness display (Sun readable, 10N or 8N option)

For bridge solutions with dimming according to IEC 62288, the “Sun Readable” option have to be selected. For

operation in other locations on the ship, standard screen brightness is suitable.

Note:

1. The monitor off/on button does not switch off the touch functionality.

2. The + or – buttons may appear to react slowly. Try holding the button pressed in for about 3-5 seconds

to adjust the brightness. This is due to the number of dimming levels.

3. For models with a serial number prior to 1608004-A (manufactured before Aug 2016):

- After pushing Fully Dark, use Night Mode, Day Mode or + to bring light back.