Autic System Marine PC Rev. 1.1 Page 56
CHA_FAN1 SETTING
This allows you to set CHA_FAN1’s speed. Configuration options: [Full On] and [Automatic Mode]. The default
value is [Full On].
CASE OPEN FEATURE
This allows you to enable or disable case open detection feature. The default is value [Disabled].
CLEAR STATUS
This option appears only when the case open state has been detected. Use this option to keep or clear the
record of previous chassis intrusion status.
SECURITY SCREEN
In this section, you may set, change or clear the supervisor/user password for the system.
SUPERVISOR PASSWORD
Set or change the password for the administrator account. Only the administrator has authority to change the
settings in the UEFI Setup Utility.
Leave it blank and press enter to remove the password.
USER PASSWORD
Set or change the password for the user account. Users are unable to change the settings in the UEFI Setup
Utility. Leave it blank and press enter to remove the password.
SECURE BOOT
Enable to support Windows 8 64-bit Secure Boot.
To Next Page
Loading...