AUTIC APPC-8429T - Declaration of Conformity for LCD Display

Autic System Marine PC Rev. 1.1 Page 60
DECLARATION OF CONFORMITY FOR LCD DISPLAY
Autic System declare that their LCD panels are conformed with the standard
ISO 13406-3 (Class 3).
“The standard lists four classes of devices, where a device of a specified class may
contain a certain maximum number of defective pixels. The table below shows the
maximum number of allowed defects (per type) per 1 million pixels.
Definition of Pixel Fault Classes – Maximum number of faults per million pixels
Class
Type 1
Type 2
Type 3
Cluster with
more than
one type 1 or
type 2 faults
Cluster of
type 3 faults
I
0
0
0
0
0
II
2
2
5
0
2
III
5
15
50
0
5
IV
50
150
500
5
50
Three distinct types of defective pixels are described as follows:
• type 1 = a hot pixel (always on, being color white),
• type 2 = a dead pixel (always off, meaning black), [and]
• type 3 = a stuck pixel (one or more sub-pixels (red, blue or green) are always on or always off).”
By request, products can be manufactured according to other classes.