AUTIC APPC-8429T - Using the Monitor; Monitor Adjustments

To Next Page

To Previous Page

Autic System Marine PC Rev. 1.1 Page 37

USING THE MONITOR

MONITOR ADJUSTMENTS

Membrane keypad on monitors

1) Press menu key once, you will see the menu with options on the screen.

2) Under menu, press menu key again, you will be able to select brightness, contrast, and volume, etc.

UP & DOWN

1) Under menu, you can use these 2 keys to increase and decrease setting.

2) These buttons are directly dedicated to control the display brightness.

Adjustment of dimming value brighter or darker.

(256 levels for Sun readable display)

AUTO

1) Press AUTO key to auto adjust/centralize the picture on the display.

2) Under menu, AUTO key functions as "exit" to leave the menu.

ON/OFF

Switch the monitor off/on.

Note that the monitor ON/OFF function can be disabled from factory. This must be specified when

ordering the monitor.