Need help?Do you have a question about the Autocall 4007ES and is the answer not in the manual?
Lists installation and configuration manuals for the 4007ES panel and annunciators.
Details the physical components and indicators of the FACP and annunciator user interfaces.
Describes how the panel indicates alarm conditions and the events at the user interface.
Explains how to acknowledge, silence, and reset system alarms.
Provides steps to silence audible notification appliances during an alarm event.
Details the procedure for resetting the system after an alarm condition has been resolved.
Explains how to access and view detailed information about specific alarm conditions.
Describes how the panel indicates Supervisory and Trouble conditions and the user interface events.
Explains how to acknowledge Supervisory and Trouble conditions using Global or Individual methods.
Describes how to access and view detailed information about specific Supervisory or Trouble conditions.
Describes how to access the Main Menu and lists the functions available via menu icons.
Details how to access the System Info screen and its associated buttons.
How to view the panel's unique serial number for identification purposes.
Information on how to check the status of installed cards and modules.
Details system file revisions for Bootloader, Kernel, Filesystem, and Panel UI.
How to find the panel's IP address and MAC hardware address.
Allows rolling back to previous panel firmware versions or displaying the alternate config version.
Procedure for updating the panel's current date and time using the touchscreen keypad.
Procedure for adjusting touchscreen sensitivity and pressure sensor precision.
Describes functions for backing up jobs, saving reports, and managing USB drives.
Steps for upgrading panel software using a USB drive.
Instructions for clearing all entries from the Alarm Log after investigation.
Instructions for clearing all entries from the Trouble Log after investigation.
Details how to search for specific points by type and number, and browse configured points.
Procedures for performing hardware resets and system restarts (Warm/Cold Start).
Guides on performing WalkTests and controlling panel piezos for silence or alerts.
Details on downloading configuration files to remote panels and managing job versions.
Procedures for testing earth faults, latching troubles, and performing NAC miswire tests.
Covers duplicate device search, weak answer search, and various TrueAlert appliance tests.
Covers TrueAlert NAC testing, CO Algorithms, and the use of Install Mode.
Details various NetDiag functions for analyzing network status, logging, and troubleshooting.
Explains how to access the Report Menu and generate/save/print various system reports.
Details on generating reports for TrueAlarm Service, TrueAlert NAC, Status, CO, Active List, Verification, and Self-Test.
General| Type | Addressable Fire Alarm Control Panel |
|---|---|
| Digital Alarm Communicator Transmitter (DACT) | Optional |
| Voltage | 24 VDC |
| Power Supply | 120/240 VAC, 50/60 Hz |
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
| Weight | 12 lbs (5.4 kg) (without batteries) |
To Next Page