Preventative Maintenance
34 | P a g e
o Repeat this process for the LSP and the 3 SSP chains. These chains are adjusted by loosening the
motor mount bolts. Tighten the chains by moving the motor mounts outward.
Hardware – After 1 year and every year thereafter
- Keep bin doors free of build-up
- Clean the touch screen – DO NOT SPRAY DIRECTLY ON SCREEN!!!
- Check for dropped product on the Main platter
- Check and adjust the tension on the chains
- Lube (dry lube only) the chains, sprockets, door hinges, latch assemblies, and plastic bearings.
To Next Page
Loading...
