Owner Installation Instructions GDO-6v3 EasyRoller
®
9
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
17
16
PROG INPUT is used to connect the Automatic Technology Handheld Programmer for editing control
and receiver functions, accessing diagnostic tools, and activating special features and operating modes.
SBY-3 CONNECTOR is used to connect both Battery Back Up Kits and SmartSolar’ kits.
16
17
SOLAR
JP1
15
JP1 (SOLAR)
The shunt supplied with the control board (OFF position) must be fitted (ON position) for solar operation.
To Next Page
Loading...
