7 - 10
7 HMI operation
7
7.4 Alarm Screen
For every machine alarm, the HMI also shows different alarm screens. See also
Operation Manual for Alarms/ Troubleshooting details.
Red Alarm
If the red partition, at the top, is flashing, this indicates a dangerous status such as
emergency stop pressed (1), motor overload tripped (2), malfunction of heating
system control relays stay too long Off or On (3). This requires an immediate action
from the service technician.
1
2
3
Machines
SSO, SLH, SLM, SLM-T, SLV
SLN, SLO, SLC, SIV, SLA, SIT,
CZH, CMOS,
SSO, SLH, SLM, SLM-T, SLV
SLN, SLO, SLC, SIV, SLA, SIT,
CZH, CMOS,
SSO, SLH, SLM, SLM-T, SLV
SLN, SLO, SLC, SIV, SLA, SIT,
CZH, CMOS,
HMI Screen
To Next Page