1 Introduction
1-5
1
1.1 Document information
About this Manual
The Autopack Manual consists of the following chapters:
• Introduction
• Safety Precautions
• Installation
• Maintenance & Check
• Electrical Components
•Spare parts
• Human Machine Interface(HMI)
• Diagrams & Drawings
The purpose of the introduction is to provide the user of the manual with general
information about the manual as well as the machine.
The purpose of the safety precautions is to provide the user of the manual with
information so it is safe to install, operate, and maintain the machine.
The purpose of the installation instructions is to provide the service technicians with
information on the on-site installation process.
The purpose of the maintenance instructions is to provide service technicians and
electricians with information on the equipment required for service and
maintenance.
The purpose of the electrical components is to provide service technicians and
electricians with information on the electrical equipment required for service and
maintenance.
The purpose of the spare part lists is to provide the service technicians and contact
personnel with information on how to find and order spare parts for service of the
unit.
The purpose of the Human machine interface is to provide the user of the manual
with information on how to use HMI for machine settings and alarm monitoring.
The purpose of the Diagrams & Drawings is to provide the user of the manual with
diagrams and drawings for the System.
Design modifications
The directives in this document are in accordance with the design and construction
of the unit at the time it was released by an Autopack machine production facility.
Document producer
This document has been produced by:
Autopack Co., Ltd.
98/50 Moo 11 Phutthamonthon Sai 5 Rd.,
Raikhing, Samphran, Nakornpathom
73210 THAILAND
To Next Page
Loading...