Need help?Do you have a question about the Autopack 45WLO20FP and is the answer not in the manual?
General| Brand | Autopack |
|---|---|
| Model | 45WLO20FP |
| Category | Packaging equipment |
| Language | English |
Details regarding the manual's creation, purpose, and document producer.
General information about the Autopack Sleeve Wrappers and Shrink Tunnels.
Information for identifying the specific machine model and its components.
Defines the machine's directional layout (Rear, Front, Left, Right, Infeed, Discharge).
General safety information, hazard warnings, and significance of hazard symbols.
Explanation and examples of warning and prohibition signs used on the machine.
Qualifications and responsibilities for service technicians, electricians, and operators.
Procedure for using the emergency stop buttons and their locations.
Safety procedures for operating the main power switch before service work.
Safety instructions regarding machine doors, covers, and safety switches.
Safety precautions for working inside the electrical cabinet, including high voltage risks.
Warnings about hot parts like welding bars and shrink units that can cause burns.
Safety warning about the shrink tunnel belt and risk of personal injury.
General safety advice, including handling of chemical products.
Steps to take before installing the machine, including inspection and services.
Step-by-step guide for reassembly, motor direction, communication, and quality checks.
Scheduled tasks for routine preventive maintenance of Wrapper and Shrink Tunnel.
Detailed steps for equipment checks, replacements, and controller settings.
Basic key operation and setting parameters for the inverter.
Description of components like regulator lock, shut-off valve, and pressure switch.
Purpose, location, and setting procedure for the air pressure switch.
Instructions on how to adjust the pusher speed using flow control.
Procedure for changing the welding knife, including tools required.
Steps for replacing the welding bar heater assembly.
Ensuring proper operation of rollers and dancer bars in the film supply system.
Step-by-step guide for splicing and joining wire belts.
Checklists for sleeve wrapper and shrink tunnel during commissioning and maintenance.
Information regarding document identification, numbering systems, and component designation.
Overview of the electrical system and safety features, including wiring color codes.
Diagrams showing the location of electrical cabinets and components for Wrapper and Tunnel.
Detailed lists and diagrams of electrical components for Wrapper and Tunnel units.
Parts listed by system size, distinguishing compulsory and optional items.
Diagram and parts list for the knife assembly.
Diagram and parts list for the anvil bar.
Spare parts specific to the shrink tunnel component, including rubber curtains.
List of electrical components for the wrapper unit.
List of electrical components for the tunnel unit.
Overview of the main menu and navigation options for HMI operation.
Settings for machine configuration and production parameters.
Accessing help information and support within the HMI interface.
Understanding and responding to system alarms (Red, Yellow, Blue).
To Next Page