2-10
2 Safety precautions
2
2.3-4 Machine operator
Only trained or instructed persons are allowed to operate the equipment.
The machine operator is an individual that has enough training and/or knowledge to
run the equipment in the correct way.
2.3-5 Fork lift driver
Fork lift driver should be certified according to local regulations.
The fork lift driver´s role during installation is:
• to unload transport vehicle
• to plan and transport the machine or machine parts within the plant in a safe
and smooth way
• to assist when assembling Autopack equipment
2.4 Emergency stop
In case of danger to people or risk of damage to the machine, one of the four
Emergency stop buttons must immediately be pushed.
In order to stop the machine immediately in an emergency situation, you must
know the exact location of the Emergency stop buttons.
Emergency stop must only be used in case of danger to people or machine. To
stop production in the normal way, see the Stop section in chapter operation
instructions.
Note! Emergency stops do not disconnect the electrical supply to the machine.
Location Emergency stop buttons
1 E- Stop - Wrapper Electrical Cabinet
2 E- Stop - Cooling fan unit
1
1
2
To Next Page