2-12
2 Safety precautions
2
2.6 Door and covers
Moving parts and hot surfaces could cause serious injuries!
Never inch or run the machine if any safety switch is non-operational
or any cover is not fitted.
The door leading to the risk area is provided with safety switch. This switch is part of
the safety system and must under no circumstances be bridged or by-passed
or otherwise made non-operational.
Note! Also make sure the following guards and covers are in place and
properly secured:
• safety cover over the pushers
• safety cover infeed conveyor drive sprocket
• cover for the valve manifold
• under-table cover for midstop
• safety tunnel over the infeed conveyor
To Next Page
Loading...