Autronica BS-310 - Page 97

Service Commands
Operator's Handbook, AutroSafe Interactive Fire Alarm System, Release 3, ASAFE-FO/FE Rev. E, 021105,
Autronica Fire and Security AS
Page 95
Step Actions to be taken Display Indication
4
To select OUTPUT TEST, press 2.
SERVICE
19:23
OUTPUT TEST
1 MANUAL TEST ON
2 MANUAL TEST OFF
SERVICE
19:23
OUTPUT TEST
1 MANUAL TEST ON
2 MANUAL TEST OFF
5
To select MANUAL TEST ON, press 1.
SERVICE
19:23
MANUAL TEST ON
1 FIRE ALARM DEVICES
2 FIRE PROTECTION EQUIPMENT
3 FIRE WARNING ROUTING EQUIPMENT
4 OTHER OUTPUTS
SERVICE
19:23
MANUAL TEST ON
1 FIRE ALARM DEVICES
2 FIRE PROTECTION EQUIPMENT
3 FIRE WARNING ROUTING EQUIPMENT
4 OTHER OUTPUTS
6
To select OTHER OUTPUTS, press 4.
SERVICE
19:23
MANUAL TEST ON/OTHER OUTPUTS
Output name:
Digital Output 1
Digital Output 2
7
Use the keyboard to enter text into the input box
-
OR ,- as shown in this example:
To select an output, press
then scroll downwards by pressing
9
YZ
or move up again by pressing
6
PQR
SERVICE
19:23
MANUAL TEST ON/OTHER OUTPUTS
Output name:
Digital Output 1
Digital Output 2
8
To accept the selected output and activate the
test, press twice on
SERVICE
19:23
MANUAL TEST ON
1 FIRE ALARM DEVICES
2 FIRE PROTECTION EQUIPMENT
3 FIRE WARNING ROUTING EQUIPMENT
4 OTHER OUTPUTS
SERVICE
19:23
MANUAL TEST ON
1 FIRE ALARM DEVICES
2 FIRE PROTECTION EQUIPMENT
3 FIRE WARNING ROUTING EQUIPMENT
4 OTHER OUTPUTS
A test signal will be sent to the selected Fire
Protection Equipment.
www.ukpanels.com