AUX Air Conditioner Service manual
20
b. Application method
★ Fix batteries
1. Slide open the cover according the direction indicated by arrowhead.
2. Put into two brand new batteries (7#). position the batteries to right electric poles (+&-).
3. Put back the cover.
Make sure to connect the wire to independent power source socket before you use the remote
controller.
Note: the waste battery shall be disposed properly.
★ Cooling / Heating operation mode (Cold wind type has no heating function)
1. Press the “ ” button. the operation indicator is on. the air-conditioner starts to operate the
Cooling or Heating mode.
Press the button again. the air-conditioner stops.
2. Press the MODE button. select the Cooling or Heating operation mode.
3. Press “ + ” or “ - ” the button. set the temperature range from 16℃ to 32℃.
3. Press the “ FAN ” button. you can select fan speed from “ Low ”. “ Mid ”. “ High ”. “ Auto ”.
4. Press the
★ Drying operation mode
1. Press the MODE button. select the dry mode operation.
2. Press “ + ” or “ - ” the button. set the temperature range from 16℃ to 32℃.
3. Press the “ FAN ” button. you can select fan speed.
The type of H、M series:
You can select fan speed from “Power”. “High”. “Low”. “Mute”.
The type of E series:
You can select fan speed from “Auto”. “High”. “Mid”. “Low”.
4. Press the “ ” button. the operation indicator is on. the air-conditioner starts to operate the Dry
mode.
Press the button again. the air-conditioner stops.
★ Circulation operation mode
1. Press the MODE button. select the Circulation operation mode.
2. Press the “ FAN ” button. you can select fan speed.
The type of H、M series:
You can select fan speed from “High”. “Low”. “Mute”.
The type of E series:
You can select fan speed from “High”. “Mid”. “Low”.
3. Press the “ ” button. the operation indicator is on. the air-conditioner starts to operate the
Circulation mode.
To Next Page
Loading...
Need help?
General
