Avalue Technology ECM-BT45 - Save and Exit; Expert Mode; Save Changes and Reset; Discard Changes and Reset

ECM-BT45 User’s Manual
56 ECM-BT45 User’s Manual
3.6.6 Save and exit
3.6.6.1 Expert mode
Switch Expert mode or DQV mode.
Option: DQV mode[Default] / Expert mode
3.6.6.2 Save Changes and Reset
Reset the system after saving the changes.
3.6.6.3 Discard Changes and Reset
Any changes made to BIOS settings during this session of the BIOS setup program are
discarded. The setup program then exits and reboots the controller.
3.6.6.4 Restore Defaults
This option restores all BIOS settings to the factory default. This option is useful if the
controller exhibits unpredictable behavior due to an incorrect or inappropriate BIOS setting.
3.6.6.5 Launch EFI Shell from filesystem device
Attempts to Launch EFI Shell application (Shellx64.efi) from one of the available filesystem
devices.