Avantik Cryostat QS11 / QS11UV
Avantik
36 Commerce St.
Springfield NJ 07081 / USA
387 779 - English
27
Take note that the specimen and knife edge do
not come in contact with each other. Carefully
observe the narrowing gap between knife edge
and specimen to stop the function <coarse
feed forwards> in time before the specimen
touches the knife edge.
When the front end position is reached, the
motorized coarse feed is turned off. Then the
LED in button lights up.
Note!
At the beginning of a sectioning series,
it is advisable to use the coarse feed to
move the specimen to the back third of the
horizontal specimen movement, and, if
necessary, to move the knife carrier towards
the specimen.
To Next Page
