Avaya 1140E - Page 100

Configuring the Avaya 1140E IP Deskphone
100
Table 10 on page 100 describes the configuration options on the headset
screen.
Table 10: Configuration options on the headset screen
(Part 1 of 3)
Option Function
Active Headset Device Select the active headset device;
either USB, Wired, or Bluetooth.
Note: The headset can be
selected before it is paired
(Bluetooth) or attached
(wired or USB).
Items below the Active Headset
Device field are dimmed, if either
USB headset is not selected or if
the attached headset is not one
of the Human Interface Device
(HID) supported headset types.
Wired Headset Type Select the type of wired headset
you required.
• Headset Type 1 (Generic
narrow band)
• Headset Type 2 (Wideband)
• Headset Type 3 (Wideband)