Configuring the Avaya 1140E IP Deskphone
120
9. When the name of your headset appears
in the Found box, press the Stop
context-sensitive soft key or wait for the
search to finish.
When the search is complete, the
message Search Completed Found
Device(s) appears.
10. If the name of your headset appears in
the Found box, proceed to step 15.
If your headset is not displayed in the
Found box, select your headset from the
list.
11. Press the Right navigation key one or
more times to highlight the Found box.
Press the Enter key to start the edit
mode.
12. Press the Down navigation key to open
the Found list. Press the Up/Down
navigation key to scroll and highlight
your headset.
13. Press the Enter key to select the
headset and close the list. Press the
Enter key to exit edit mode.
14. Press the Right navigation key one or
more times to highlight the Pair button
(next to the Pair Device item) and press
the Enter key.
A dialog box appears, with the prompt
Enter PIN#.
To Next Page
Loading...
