Configuring the Avaya 1140E IP Deskphone
122
17. If the name of your headset appears in
the Paired box, proceed to step 18.
If more than one device is paired, and
the one you wish to use is not shown in
the Paired box, navigate to the one you
want, as follows:
— Press the Right navigation key one
or more times to highlight the
Paired: box. Press the Enter key to
start the edit mode.
— Press the Up/Down navigation key
to open the list. Press the Up/Down
navigations key to scroll in the
Paired list and highlight your
headset.
— Press the Enter key to select the
headset and close the list. Press the
Enter key to exit edit mode.
To Next Page
Loading...
