Configuring custom settings
231
manager also allows you to browse and copy certain files from the phone
file system onto a USB flash drive.
After you select the File Manager menu by choosing Services menu, you
can navigate to the IP Deskphone file system and any USB drives
attached. From there, you can either copy a file from the IP Deskphone
onto their USB drive or from the USB drive to the IP Deskphone.
After you select a File manager, and there are no USB drives plugged into
the IP Deskphone, the root screen of the IP Deskphone file system
screen the screen that appears.
The following are the options available for the Root screen:
• Select—use to enter the selected folder.
• Delete—prompts you to delete contents of selected folder (folders
are not deleted because they are on the IP Deskphone).
• Exit—If you are at the root folder of the flash disk, the screen is
dismissed and you are sent back to previous menu. If you are already
inside a folder, then the Back context-sensitive soft key acts the
same as the .. item and moves up one level in the directory structure.
After you select a File manager, and if the USB drives are plugged into
the IP Deskphone, the screen that appears next is the Select Device
screen. This screen lists the IP Deskphone, and USB drives that are
available. After you select one of the items, the contents of that device
(folders and files appears), and .. allows you to navigate back to the
select drive screen.
The following are the options available for the Select Device screen:
• Select—to enter the selected device.
• Exit—to dismiss the file manager and returns to the Services menu.
After you select the device you want to navigate, one of the following
screens in Figure 21 on page 232 appears:
To Next Page
Loading...
