Avaya 1220 - Page 110

Receiving a call
110
You can set the Call Ignore feature to either Local or Network. When Call
Ignore is set to Local, only that IP Deskphone is affected, and it stops
ringing when you press the Ignore context-sensitive soft key. When Call
Ignore is set to Network and you press the Ignore context-sensitive soft
key, the IP Deskphone stops ringing, and a message is sent to the
network indicating that you are busy at all SIP IP Deskphones you are
logged on to, and that server should stop trying to contact you.
To set the Ignore feature to Local or Network press the Prefs context-
sensitive soft key, select Feature Options, and then select Call Ignore
Action from the menu. Press the Change context-sensitive key to
change the Call Ignore setting to either Call Ignore: Local, or Call Ignore:
Network.
Note: When you are on active call and you receive an incoming call,
do not press the Goodbye fixed key to ignore an incoming call. If you
press the Goodbye fixed key, the current call disconnects. Press the
Ignore context-sensitive soft key to ignore the incoming call.
To ignore an incoming call:
Prefs 1. Press the Prefs context-sensitive soft
key, select Feature Options, and then
select Call Ignore Action from the
menu.
Change 2. Press the Change context-sensitive key
to change the Call Ignore setting to
either Call Ignore: Local or Call Ignore:
Network