While on an active call
170
• Save—to save the updated value to the system configuration file.
• Abc (/123)—to toggle the input mode to digits (or alphabets).
• Clear—to clear the character behind the cursor.
• Back—to return to the previous screen.
Note: For these configuration changes to take effect, you must
manually log off and log on.
Transferring a call
Note 1: When more than one call is on hold, the call you want to
transfer must be the active call. For more information, see “To make a
call on hold the active call:” on page 162.
Note 2: The IP Deskphone does not automatically place the call you
want to transfer on hold. To prevent the caller from hearing the
transfer process, place the caller on hold and then complete the
transfer process.
To transfer a call to another phone:
1. Press the Up/Down navigation key to
highlight Transfer Call from the menu.
Trnsfer
2. Press the Trnsfer context-sensitive soft
key while on a call to access the Trnsfer
menu.
abc
3. Press the abc/123 context-sensitive soft
key to toggle between numeric and
alphabetic input.
To Next Page
Loading...
