Avaya 1220 - Page 266

Advanced features
266
Figure 50 on page 266 displays the screensaver password screen.
Figure 50: Screensaver password screen
The options, which are available for the Enable (with password) mode are
as follows:
• Ok—Screensaver enabled message appears if the password is valid.
Invalid password message appears if the password is invalid.
• 123/abc—to toggle input mode between numeric or alphabet.
• Set—context-sensitive soft key appears only if the feature allows the
setting of user-defined passwords. This key invokes a password
definition screen that allows you to configure a password.
• Back—to dismiss the Enable (with password) mode menu.
If the option to use a user-defined password is allowed, the interface
(screen) to configure the password, is accessed through the Set context-
sensitive soft key on that screen. If a user-defined password is not
allowed, then the Set context-sensitive soft key is not visible, and you can
use only the primary user login password to enable the
password–protected screensaver.
After the screensaver is activated, if the IP Deskphone is idle for the
defined delay/time interval, the screensaver takes control of the IP
Deskphone. Figure 51 on page 267 displays the screen with locked
screen.