Avaya 3735 - Page 80

Procedure
1. Press Menu.
2. Select Contacts.
3. Select Edit contact.
4. Select the contact, and press Edit.
5. Select any of the following:
• Name
• Work number
• Mobile number
• Other number
• Ring signal
6. Press Edit, and then enter the new name or number or select the new ring signal.
The administrator can add a variable or the character “U” to the Work number, Mobile
number, or Other number field to allow users to enter additional numerical characters
before calling the number.
7. Press OK.
8. Press Save.
Deleting a contact
Procedure
1. Press Menu.
2. Select Contacts > Delete contact.
3. Select the contact that you want to delete, and then press Delete.
4. Press Yes to confirm.
It is not possible to delete a company phonebook contact. These contacts are indicated by
the Locked entry ( ) icon before their name.
Setting a ring signal for a contact
Procedure
1. Press Menu.
2. Select Contacts.
3. Select Add contact or Edit contact.
4. Select Ring signal.
5. Select the ring signal to be used for the contact.
Menu operation
August 2019 Using 3735 DECT handsets with Communication Manager and IP Office 80
Comments on this document? infodev@avaya.com