Table 2: Secure and nonsecure protocols
Nonsecure
protocols
Default status Equivalent secure
protocols
Default status
FTP Disabled SCP Disabled
Telnet Disabled SSH v1, v2
Avaya recommends
that you use SSHv2
instead of SSHv1.
Disabled
SNMPv1, SNMPv2 Enabled SNMPv3
You must load the
DES/AES image on
the platform to use
SNMPv3. For more
information, see
Configuring Security
on Avaya Ethernet
Routing Switch 4000
Series,
NN47205-505.
Enabled
Rlogin Disabled Secure SHell (SSH)
v1, v2
Disabled
HTTP Disabled HTTPS
Important:
Avaya
recommends that
you take the
appropriate
security
precautions within
the network if you
use HTTP.
Enabled
Management port
The ERS 4000 series hardware is not equipped with a designated out-of-band (OOB)
management port. Use the management port for OOB management when an IP address is
assigned to that port. Use the console interface or the in-band switch IP address set from the
console terminal through any network port to manage the switch. Before you can use the OOB
Management port
Quick Start Configuration for Avaya ERS 4000 Series November 2013 15
To Next Page
Loading...
