4850GTS-PWR+(config)#save config
4850GTS-PWR+(config)#show banner
Current banner setting: CUSTOM
4850GTS-PWR+(config)#end
4850GTS-PWR+#exit
My Company Name
123A My Address Avenue My Town CA 12345
Phone: (123) 555-5555 * Fax (123) 555-5555
http://www.mycompanywebsite.com
Enter Ctrl-Y to begin.
***************************************************************
*** Ethernet Routing Switch 4850GTS-PWR+ ***
*** Avaya ***
*** Copyright (c) 1996-2013, All Rights Reserved ***
*** ***
*** HW:R0B FW:5.6.0.15 SW:v5.7.0.003 ***
***************************************************************
Variable definition
Use the data in the following table to use the banner command.
Table 10: banner command
Variable Value
custom Disables the use of the default banner.
static Activates the use of the default banner.
<line_number> Banner line number you are setting. The
range is 1–19
<LINE> Specify the characters in the line number.
Configuring system identification
About this task
Configure system identification to specify the system name, contact person, and location of
the switch. Also, to add trap receiver to the trap-receiver table.
Configuring system identification
Quick Start Configuration for Avaya ERS 4000 Series November 2013 33
To Next Page
Loading...
