600 VLAN #600 B-VLAN None 0x0000 Yes IVL No
Port Members: NONE
700 VLAN #700 Port None 0x0000 Yes IVL No
Port Members: NONE
Total VLANs: 13
Variable Definitions
Variable Value
<VID_list> Enter as an individual VLAN ID to create a single
VLAN or enter as a range of VLAN IDs to create
multiple VLANs simultaneously. A VLAN ID can range
from 1 to 4094.
Note:
VLAN ID values 4001 through 4008 are reserved
and cannot be used.
name <line> Specifies a unique alphanumeric name for an
individual VLAN.
Note:
Do not enter a value for this parameter when you
are creating multiple VLANs simultaneously.
type Enter the type of VLAN to create:
• port - port-based
• protocol - protocol-based (see following list)
remote-span Specify as RSPAN VLAN.
protocol-decEther2 Specify a decEther2 protocol-based VLAN.
protocol-ipEther2 Specify an ipEther2 protocol-based VLAN.
protocol-ipv6Ether2 Specify an ipv6Ether2 protocol-based VLAN.
protocol-ipx802.2 Specify an ipx802.2 protocol-based VLAN.
protocol-ipx802.3 Specify an ipx802.3 protocol-based VLAN.
protocol-ipxEther2 Specify an ipxEther2 protocol-based VLAN.
protocol-ipxSnap Specify an ipxSnap protocol-based VLAN.
protocol-Netbios Specify a NetBIOS protocol-based VLAN.
protocol-RarpEther2 Specify a RarpEther2 protocol-based VLAN.
protocol-sna802.2 Specify an sna802.2 protocol-based VLAN.
protocol-snaEther2 Specify an snaEther2 protocol-based VLAN.
Configuring the switch using ACLI
46 Quick Start Configuration for Avaya ERS 4000 Series November 2013
Comments? infodev@avaya.com
To Next Page
Loading...
