troubleshooting and diagnostic tools. For more information, or to purchase plug-ins, go to
www.avaya.com.
Enterprise Device Manager access
To access EDM, open http://<deviceip>/login.html or https://<deviceip>/login.html from either
Microsoft Internet Explorer versions 8.x and 9.x, or Mozilla Firefox 23.x.
Important:
You must enable the Web server from ACLI to enable HTTP access to EDM. If you want
HTTP access to the device, you must also disable the Web server secure-only option. The
Web server secure-only option is enabled by default and allows HTTPS access to the device.
Take the appropriate security precautions within the network if you use HTTP.
If you experience issues while connecting to EDM, check the proxy settings. Proxy settings
can affect EDM connectivity to the switch. Clear the browser cache, and do not use a proxy
when connecting to the device.
Default user name and password
The following table contains the default user name and password that you can use to log on
to Ethernet Routing Switch 4000 using EDM. For more information about changing the Ethernet
Routing Switch 4000 passwords, see Configuring Security on Avaya Ethernet Routing Switch
4000 Series, NN47205-505.
Table 3: EDM default username and password
Username Password
admin password
Important:
The default passwords and community strings are documented and well known. Avaya
strongly recommends that you change the default passwords and community strings
immediately after you first log on. For more information about changing user names and
passwords, see Configuring Security on Avaya Ethernet Routing Switch 4000 Series,
NN47205-505.
Device Physical View
Device physical view
Enterprise Device Manager
Quick Start Configuration for Avaya ERS 4000 Series November 2013 17
To Next Page
Loading...
