Model ROHS product number Description
AA1419062-E6 1490 nm, up to 70 km
AA1419063-E6 1510 nm, up to 70 km
AA1419064-E6 1530 nm, up to 70 km
AA1419065-E6 1550 nm, up to 70 km
AA1419066-E6 1570 nm, up to 70 km
AA1419067-E6 1590 nm, up to 70 km
AA1419068-E6 1610 nm, up to 70 km
Small form factor (SFP+) pluggable plus transceivers
SFP+ transceivers are hot-swappable input and output enhancement components that allow 10
gigabit connections. All Avaya SFP+ transceivers use Lucent connectors (LC) to provide precision
keying and low interface losses.
Note:
The following table lists and describes the Avaya SFP+ devices specific to the 4450GTX-HT-PWR+
model.
Table 5: Supported SFP+ transceivers and cables (VSP 4000 4450GTX-HT-PWR+ only)
Model number
Part number Description
10GBASE-LR (-5 °C to +85 °C) AA1403011-E6HT 1310 nm SMF. The range is up to
10 km.
10GBASE-SR (0 °C to +85 °C) AA1403015-E6HT 850 nanometers (nm). The range
is up to the following:
• 26 m using 62.5 micrometer
(μm), 160 megaHertz times km
(MHz-km) MMF
• 33 m using 62.5 μm, 200 MHz-
km MMF
• 66 m using 62.5 μm, 400 MHz-
km MMF
• 82 m using 50 μm, 500 MHz-km
MMF
• 300 m using 50 μm, 2000 MHz-
km MMF
• 400 m using 50 μm, 4700 MHz-
km MMF (OM4)
Note:
The following table lists and describes the Avaya SFP+ devices supported on the 4450GTX-HT-
PWR+ model, but their use causes a warning due to their limited temperature rating.
Supported optical devices
August 2014 Installing the Avaya Virtual Services Platform 4000 VSP4450GTX-HT-PWR+ 13
Comments? infodev@avaya.com
To Next Page
Loading...
