Chapter 4: Installing the Avaya VSP 4000
4450GTX-HT-PWR+
Installation fundamentals
The following section describes the installation fundamentals for the VSP 4450GTX-HT-PWR+
model.
VSP 4450GTX-HT-PWR+ model
The VSP 4450GTX-HT-PWR+ model consists of:
1. 48 10/100/1000 Base TX RJ-45 ports with PoE+
2. two combo SFP ports supporting fiber or copper connection
3. two 1/10G SFP + ports for fiber or copper connection
Figure 1: VSP 4450GTX-HT-PWR+
1. VSP 4000 USB port
Note:
The VSP 4450GTX-HT-PWR+ model does not require a USB device in the USB port for normal
operation. The USB port can be used for file transfer of configs and logs using a USB drive.
2. Switch LEDs
3. 10/100/1000 PoE+ ports (LEDs above ports)
4. Combo port SFP slots. Supports Avaya 1G SFPs and 100Base low speed SFPs.
5. SFP+ slots. Supports Avaya’s 1G SFPs and 10G SFP+s.
6. Console Port
Electrostatic discharge
This section provides information and procedures to prevent electrostatic discharge during
installation.
16 Installing the Avaya Virtual Services Platform 4000 VSP4450GTX-HT-PWR+ August 2014
Comments? infodev@avaya.com
To Next Page
Loading...
